Skip to content
Rocking P Blasting

Technology

Modeled in 3D, recorded hole by hole.

Each site is flown with RTK drones and built into a 3D model. Benches and shots are designed on the model, the face is checked before loading, and every hole is recorded in Pop Rocks, our own proprietary software.
01

Drone surveys

RTK drone photogrammetry, flown in-house by FAA-certified pilots. Each flight becomes a surveyed 3D surface and orthophoto: flown for the design, again before the blast, and again as the site changes.

  • RTK
  • FAA-certified pilots
  • Surface model + orthophoto
Drone model of a hillside quarry site before its production benches were opened

2023

Drone model of the same quarry site with its production benches opened

Today

A quarry startup in Colorado, from our drone models: the hillside when we started in 2023, and its production benches today.
02

Bench and shot design

Benches and shots are designed on the drone model: the pattern, hole depths and angles set against the real surface, not a flat plan. Our blast manager designs and models every shot before it's loaded.

  • 3D bench design
  • Pattern, depth and angle
  • Modeled before loading
A drone model of a quarry bench beside an interstate, with the shot design drawn on it: holes, rows and a face profile line
Drone model with the shot design
A drone model of a quarry with benches outlined and two shot designs drawn on it
Bench model with two shot designs
03

Face profiling

Before loading, the burden on each front-row hole is measured from the face model at every depth. A thin spot in the face shows up before any explosive goes in the hole.

  • Burden at depth
  • Front-row holes
  • Before loading
A 3D drone model of a quarry bench: the drill on its hole, designed and drilled holes across the bench, and the face below shaded by burden
Face model · the drill on its hole, burden shaded on the face
Shot Explorer · one face-row hole, burden measured to the face at each depth
04

Every hole in 3D

Holes are staked by GPS from the design and logged as they're drilled. Each one sits on the drone model where it was drilled; see-through draws it to its depth, so the pattern reads against the bench in three dimensions.

  • GPS layout
  • Hole-by-hole drill logs
  • See-through 3D
Our own software's 3D view of a quarry bench on its drone model: drilled and fired holes on the surface, joined by hole-spacing linesThe same bench with the ground see-through: every hole drawn as a column to its depth, drilled holes in blue and fired holes in green
One bench, surface and see-through · drilled holes blue, fired holes green
05

Loading and timing

Each hole's load is designed and recorded: holding on top, the explosive column below, and the firing sequence across the pattern. Bulk ANFO, heavy ANFO and emulsion, with electronic or shock-tube initiation.

  • ANFO · heavy ANFO · emulsion
  • Electronic and shock-tube
  • Timing per shot
Shot Explorer in our own software: a row of nine blast holes cut open, each showing its holding on top and its explosive column below
Shot Explorer · a row cut open: holding and explosive
Shot Explorer · a fired shot played back hole by hole, at quarter speed
06

Records and customer access

Vibration and airblast are recorded on each shot by an independent firm, with pre-blast inspections where required. Each shot keeps one record, from drill log to seismograph report, and customers get their own login to see the blasting data for their project.

  • Independent seismograph
  • One record per shot
  • Customer login
Drill logs
Every hole's location and depth, logged as it's drilled.
Shot diagrams
The pattern, the loads and the timing for each shot.
Manifests
Explosives tracked from the magazine to the hole.
Seismograph
Vibration and airblast on each shot, from an independent firm.
GPS location
Where each shot was fired.
Customer access
Shots, blast reports and files for your project, under your own login.

Let's work together.

Send the plans, the schedule and the location for your next project.

CallContact us